Some Graph Tech customers have tried this with a simple Y-connection and found that the two electronic circuits interfere with each other if they're both powered on. If either is shut off, the other one works fine, so yes, you can run one or the othe
The Traktion switch is a tiny slider switch that has two positions, left and right. Left is for Roland converters, and right is for Axon converters. If you have a brand other than these two, try both settings and use the one that tracks best.
Yes, you can install only the Hexpander, and you will get MIDI out on a 13-pin jack (hex output, a filtered analog signal). With the addition of the BE-0182-G0 Mag to Pin-7 harness, your mag signal gets delivered to pin 7 of the 13-pin connector. Mos
The ghost Hexpander is the fastest tracking MIDI system on the market and is renowned for being very accurate. It offers the Traktion tracking adjustment to match it perfectly to Axon or Roland MIDI converters.
Currently, the Hexpander and all MIDI converters are limited to six strings. There are two popular workarounds for more than six strings:.
The PC board measures 1-5/8" x 1-1/8". With the connectors on, it's about 3/8" high. Piggybacked with the Acousti-Phonic, they are 1/2" high.
Yes. In the standard Hexpander-only installation, the magnetic and acoustic/MIDI systems exist parallel to each other, but are not connected, so there's no interaction between them.
We only stock our switches in chrome finish, but the switch is a regular on/off/on SPDT mini toggle, available at most guitar parts retailers. You can special-order the QuickSwitch harness only by phone (for half the price), but you may find it easie
The Traktion switch is a tiny slider switch that has two positions, left and right. Left is for Roland converters, and right is for Axon converters. If you have a brand other than these two, try both settings and use the one that tracks best.
Our Hexpander Volume Pot is a 250K linear (type-B) pot. A 250K audio-taper pot will also work, but mid-volume will not be at mid-scale. You may choose to do this, especially if you are putting the MIDI volume on a stacked pot because mixed linear/aud
You will need a little accessory, the Mag to Pin-7 Harness, to connect the mags to the Hexpander. (you do not need this if you are also installing the Acousti-Phonic; it delivers the mag signal to the Hexpander) Solder the green wire on the Mag to Pi
G D A E = 2 3 4 5 and adjust the instrument input setting in your MIDI converter.
B G D A E = 1 2 3 4 5 or G D A E B = 2 3 4 5 6 and adjust the instrument input setting in your MIDI converter.
B G D A E B = 1 2 3 4 5 6 or E B G D A E = 1 2 3 4 5 6 and adjust the instrument input setting in your MIDI converter.
Add the Mag-to-Pin-7 harness, and connect the green wire to the tip lug of your 1/4" jack. This is where the mag and MIDI systems interface.
Many of our saddles that are made for 6-string bridges will also fit on 7-string bridges. If you do not find a 7-saddle set on our Web site, but see a saddle that looks like it would fit your guitar, contact us and we will put together a custom set o