Acousti-Phonic with Quickswitch
The standard way of wiring the Acousti-Phonic, same as in the manual with the addition of the optional QuickSwitch for mag/both/acoustic.
All articles
Standard Installations
Acousti-Phonic Kit
The standard way of wiring the Acousti-Phonic, same as in the manual, with the Acoustic Pot with Mid/Dark Switch and a QuickSwitch (PK-0240-00 or PK-0340-00).
Powering Active Pickups
The standard installation for active pickups like EMG's. Shows how both the Acousti-Phonic and active pickups can run off the same battery source, from 9v ot 18v.
Hexpander First Row
These connections are on the Hexpander's pass-through connector to the Acousti-phonic when they're piggybacked together, so they're the same as the standard installations for the Acousti-phonic.
Hexpander Second Row
The standard connections for the Hexpander pickups, optional switches, and volume pot.
Pin 7 Harness
Connect the Pin 7 harness in Hexpander-only installations so that mag and acoustic are available on the 13-pin connector. Note this requires the addition of an acoustic volume pot, or you can omit the pot and get acoustic out at full volume all the t
Passive Volume Kit
This is how you install the Passive Volume Kit (PE-0400-00) when only using a set of ghost loaded saddles or a ghost loaded bridge without a preamp.